Petroleum residues in the waters of the Shatt al-Arab River and the northwest region of the Arabian Gulf

During April 1980, water samples were collected from 12 sites in the Shatt al-Arab River and its estuary in the northwest region of the Arabian Gulf. The samples were extracted and the concentration of petroleum hydrocarbons were determined spectrofluorometrically, in order to provide information on the background values of oil generally present in these waters. Total hydrocarbon concentrations of these samples ranged from 2.7 to 86.7 μgL^?1 expressed in terms of Kuwait crude oil equivalents. The highest concentrations were found at sites in the Shatt al-Arab River that are near port areas.     

Soil pollution by petroleum products, III. Kerosene stability in soil columns as affected by volatilization

The stability of kerosene in soils as affected by volatization was determined in a laboratory column experiment by following the losses in the total concentration and the change in composition of the residuals in a dune sand, a loamy sand, and a silty loam soil during a 50-day period. Seven major compounds ranging between C₉ and C₁₅ were selected from a large variety of hydrocarbons forming kerosene and their presence in the remaining petroleum product was determined. The change in composition of kerosene during the experimental period was determined by gas chromatography and related to the seven major compounds selected. The experimental conditions — air-dairy soil and no subsequent addition of water—excluded both biodegradative and leaching. losses.The losses of kerosene in air-dried soil columns during the 50-day experimental period and the changes in the composition of the remaining residues due to volatilization are reported. The volatilization of all the components determined was greater from the dune sand and loamy sand soils than from the silty loam soil. It was assumed that the reason for this behavior was that the dune sand and the loamy sand soils contain a greater proportion of large pores (>4.5 μm) than the silty loam soil, even though the total porosity of the loamy sand and the silty loam is similar. In all the soils in the experiment, the components with a high carbon number formed the main fraction of the kerosene residues after 50 days of incubation.     

煤无烟燃烧锅炉炉内燃烧特性分析

对一台所设计的DZL1．0-0．7-AⅢ煤无烟燃烧锅炉炉内燃烧特性进行了数值模拟。对床层反应，采用了基于热力学平衡法的“黑箱模型”，而对于床层上方炉膛空间内的气相湍流燃烧则采用了标准κ-ε模型、旋涡消散模型和离散坐标模型。采用非结构化四面体网格生成技术处理复杂炉膛几何空间的网格生成。通过数值模拟，得到炉内速度场，温度场，浓度场等参数的分布特性。结果表明：“多孔分层错列撞击流式”二次风的引入对于改变炉内流动和燃烧特性，加强炉内烟气和空气的混合，强化燃烧及实现炉内消烟除尘具有重要的作用。     

Effect of long-term application of biosolids for land reclamation on surface water chemistry

Biosolids are known to have a potential to restore degraded land, but the long-term impacts of this practice on the environment, including water quality, still need to be evaluated. The surface water chemistry (NO3-, NH4+, and total P, Cd, Cu, and Hg) was monitored for 31 yr from 1972 to 2002 in a 6000-ha watershed at Fulton County, Illinois, where the Metropolitan Water Reclamation District of Greater Chicago was restoring the productivity of strip-mined land using biosolids. The mean cumulative loading rates during the past 31 yr were 875 dry Mg ha(-1) for 1120-ha fields in the biosolids-amended watershed and 4.3 dry Mg ha(-1) for the 670-ha fields in the control watershed. Biosolids were injected into mine spoil fields as liquid fertilizer from 1972 to 1985, and incorporated as dewatered cake from 1980 to 1996 and air-dried solids from 1987 to 2002. The mean annual loadings of nutrients and trace elements from biosolids in 1 ha were 735 kg N, 530 kg P, 4.5 kg Cd, 30.7 kg Cu, and 0.11 kg Hg in the fields of the biosolids-amended watershed, and negligible in the fields of the control watershed. Sampling of surface water was conducted monthly in the 1970s, and three times per year in the 1980s and 1990s. The water samples were collected from 12 reservoirs and 2 creeks receiving drainage from the fields in the control watershed, and 8 reservoirs and 4 creeks associated with the fields in the biosolids-amended watershed for the analysis of NO3- -N (including NO2- N), NH4+-N, and total P, Cd, Cu, and Hg. Compared to the control (0.18 mg L(-1)), surface water NO3- -N in the biosolids-amended watershed (2.23 mg L(-1)) was consistently higher; however, it was still below the Illinois limit of 10 mg L(-1) for public and food-processing water supplies. Biosolids applications had a significant effect on mean concentrations of ammonium N (0.11 mg L(-1) for control and 0.24 mg L(-1) for biosolids) and total P (0.10 mg L(-1) for control and 0.16 mg L(-1) for biosolids) in surface water. Application of biosolids did not increase the concentrations of Cd and Hg in surface water. The elevation of Cu in surface water with biosolids application only occurred in some years of the first decade, when land-applied sludges contained high concentrations of trace metals, including Cu. In fact, following the promulgation of 40 CFR Part 503, the concentrations of all three metals fell below the method detection level (MDL) in surface water for nearly all samplings. Nitrate in the surface water tends to be higher in spring, and ammonium, total P, and total Hg in summer and fall. Mean nitrate, ammonium, and total phosphorus concentrations were found to be greater in creeks than reservoirs. The results indicate that application of biosolids for land reclamation at high loading rates from 1972 to 2002, with adequate runoff and soil erosion control, had only a minor impact on surface water quality.     

数控机床的故障诊断

针对数控机床的故障特点，主要介绍了数控机床机械类故障和电气类故障的诊断程序和诊断方法。     

The distribution of intertidal phytopsammon in an Oregon estuary

The sediments of two tidal flats in Yaquina Bay, Oregon, USA, were studied to determine the distribution and abundance of the interstitial microalgal communities. The hydrography of the bay, as well as fluetuations in various physical and chemical parameters appear to regulate the biomass and the vertical and intertidal distribution of these organisms.